Leather Sissy Bar Bag
J009072013-11-01
GENERAL
Kit Numbers
51903-98, 52770-97, 52994-98, 52995-98, 52996-98, 52997-98, 52998-98
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
- This bag must be used with a sissy bar pad.
- This bag will not fit on Touring backrests.
- This bag will not fit with mini or short sissy bars.
- This bag will not fit when using slip over pads on any sissy bar.
- See Figure 2 for kit contents.
INSTALLATION - LOW SISSY BARS
NOTE
The spacer will not be used on low sissy bars.
- Remove and discard mounting screw from backrest pad, if currently in place.
- See Figure 1. Align hole in sissy bar bag (1), hole in sissy bar and backrest pad mounting hole.
- Secure bag to sissy bar with supplied screw (2) and washer (3) as shown.
| 1 | Sissy bar bag |
| 2 | Screw |
| 3 | Washer |
| 4 | Sissy bar |
| 5 | Pad |
Figure 1. Installation on Low Sissy Bar
INSTALLATION - TALL SISSY BARS
- Remove and discard mounting screws from backrest pad, if currently in place.
- See Figure 2. Align holes in sissy bar bag (1), holes in sissy bar, holes in spacer (4) and backrest pad mounting holes.
- Secure bag to sissy bar with supplied screws (2) and washers (3) as shown.
Figure 2. Service Parts
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Sissy bar bag | Not sold separately |
2 | Screws, (2) | 2602 |
3 | Washers, (2) | 6036 |
4 | Spacer (tall sissy bars only) | 52960-97 |
5 | Tall sissy bar (not included) | |
6 | Backrest pad (not included) |