Chrome Inner Primary Housing
J017242006-09-18
GENERAL
Kit Number
60639-00, 60739-01, 60747-01, 60751-01
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is available from a Harley-Davidson Dealer.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Chrome inner primary housing assembly | Not Sold Separately |
There are no Service Parts available with this kit.
INSTALLATION
NOTE
This kit installs exactly the same way as the original equipment primary housing.
- See the appropriate Service Manual for your model motorcycle, in the Drive section, for all removal, assembly and disassembly procedures.
NOTE
Chain tensioner anchor plate, bolt and screws should be removed from original equipment and reinstalled on chrome inner primary housing. Tighten screws to 12-14 ft-lbs (16-19 N-m).