SWINGARM PIVOT BOLT COVERS
J023012021-08-02
Table 1. General Information
Kits | Suggested Tools | Skill Level(1) |
|---|---|---|
48893-01, 48894-02, 47647-09, 47500047 | Safety Glasses |   |
(1) Only simple tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Swingarm Pivot Bolt Covers
Table 2. Kit Contents: Swingarm Pivot Bolt Covers
 | Item | Qty | Description | Part No. | Notes |
|---|---|---|---|---|---|
 | 1 | 1 | Bolt covers, swingarm pivot (chrome) | 48893-01 | |
| 2 | 1 | Bolt covers, swingarm pivot (chrome w/insert) | 48894-02 | |
| 3 | 1 | Bolt covers, swingarm pivot (gloss black) | 47647-09 | |
| 4 | 1 | Bolt covers, swingarm pivot | 47500047 |
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Ensure you are using the most current version of the instruction sheet which is available at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALL
| 1. | Place a swingarm pivot-bolt cover in position over a swingarm pivot. NOTE For kit 48894-02, orient engraved insert pattern to desired position. After installation, rotate cover to adjust insert pattern. | |
| 2. | Firmly press cover into place with your hand. | |
| 3. | Repeat steps 1 and 2 for opposite side. NOTE Do not use a hammer to install swingarm pivot-bolt cover. Installation with a hammer could damage cover. If installation is difficult, bend inner tabs inward slightly, then press cover into place. |
Figure 2. Swingarm Pivot-Bolt Cover Installation Before (Above) and After (Below)
NOTE
For cover removal, use a blade to pry cover from swingarm and to prevent damage to cover.