Brake Pedal Pad Kit
J025772016-08-22
GENERAL
Kit Number
42841-03, 50600165, 50600232
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
NOTE
A Service Manual for your motorcycle is available at your Harley-Davidson dealer.
- Remove the previously installed brake pedal cover from the foot brake lever. Discard pedal cover.
- See Figure 1. Align the assembly over the foot brake pedal and insert the threaded stud through the hole in the pedal.
- Obtain the washer (3) and locknut (2) from the kit and secure the pedal pad assembly to the foot brake pedal.
- Tighten the locknut to 33 in-lbs (2.5 Nm).
NOTE
Brake Pedal will be fastened to cover with three screws.
Service Parts
Figure 1. Service Parts
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Screw, 4-40x1/4 inch (3) | 4277 |
2 | Locknut | 7686 |
3 | Washer | 6703 |
4 | Tread, brake pedal pad (Kit 42841-03) | 42843-03 |
Tread, brake pedal pad (Kit 50600165) | Not Sold Separately | |
5 | Cover, brake pedal pad (Kit 42841-03) | Not Sold Separately |
Cover, brake pedal pad (Kit 50600165) | Not Sold Separately | |
Brake pedal assy (Kit 50600232) | Not Sold Separately |