SPORTSTER LOW REAR SUSPENSION KIT
J029082007-08-30
GENERAL
Kit Number
54733-04
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Spanner wrench (94700-52L) is available for separate purchase and is required for shock preload adjustment.
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
INSTALLATION
NOTE
Internal shock absorber components are not repairable beyond the Service Parts listed on this instruction sheet. Consult your Harley-Davidson dealer if further service is required.
The installation procedures for this kit are the same as the original equipment (OE) installation procedures in the Service Manual. Refer to the appropriate Service Manual for the rear suspension system removal and installation procedures. The OE hardware will be re-used in the kit installation.
WARNINGInstallation of any accessory suspension components can affect cornering clearance. This could distract the rider, causing loss of control and death or serious injury. (00431b)
Shock Preload (Spring) Adjustment
Refer to the appropriate Service Manual for spring adjustment. Spanner wrench (94700-52L) is required for spring adjustment.
SERVICE PARTS
Figure 1. Service Parts: Sportster Low Rear Suspension Kit
Table 1. Service Parts: Sportster Low Rear Suspension Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Rear shock (2) | 54734-04 |