0/0
Custom Brake Pedal Pad
J031682013-11-01
GENERAL
Kit Number
42701-05
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
NOTE
A Service Manual for your motorcycle is available at your Harley-Davidson dealer.
  1. See Figure 1. Remove the previously installed brake pedal cover from the foot brake lever.
  2. Position the pad housing over the brake pedal aligning raised area under plate with oval hole in brake pedal.
  3. Position washer (3) under hole of the brake pedal.
  4. From top of mounting plate, install tread through pad housing, brake pedal, and washer.
  5. From under brake pedal, install locknut (4) to secure pad housing and washer to brake pedal. Tighten locknut to 60-90 in-lbs (6.78-10.16 Nm).
Figure 1. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Tread
42718-05
2
Pad housing
42717-05
3
Washer
6703
4
Locknut
7686