DYNA VOLTAGE REGULATOR KIT
J035942005-01-03
GENERAL
Kit Number
74665-04, 74667-06
Models
Kit 74665-04 fits 2004 through 2005 FXDL/I (Dyna™ Low Rider®) and FXDWG/I (Dyna™ Wide Glide®) model motorcycles.
Kit 74667-06 fits 2006 and later Dyna™ model motorcycles.
INSTALLATION
| 1. | Remove and discard the original voltage regulator mounting screws. | |
| 2. | See Figure 1. Place a chrome washer (4) onto each of the button head screws (5) from the kit. Insert the screws into the mounting holes in the new voltage regulator cover (1). Place first a spacer (2), then a Nylon washer (3) over the screw threads on the inside of the cover. | |
| 3. | Fasten the cover through the voltage regulator into the motorcycle frame. Tighten to 6.8–9 N·m (60–80 in-lbs). |
SERVICE PARTS
Figure 1. Voltage Regulator Cover Components
Table 1. Service Parts: Voltage Regulator Cover Components
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Regulator cover | Not Sold Separately |
2 | Spacer, 1.0 inch (25 mm) long (2) | Not Sold Separately |
3 | Washer, Nylon (2) | 62917-01 |
4 | Washer, Chrome (2) | Not Sold Separately |
5 | Screw, button head, hex socket 1/4-20 x 2-1/4 inch long (2) | Not Sold Separately |