Description (Quantity) | Part Number |
---|---|
Seat Bumpers (4) | Not Sold Separately |
Template (1) | Not Sold Separately |
1. | Remove OE seat assembly. | |||||||||||||
2. | Thoroughly wash rear fender with soap and water. | |||||||||||||
3. | Rinse with clear water and dry with a clean cloth. | |||||||||||||
4. | Swab the fender with isopropyl alcohol and dry thoroughly. | |||||||||||||
5. | Cut template in half along dotted line. | |||||||||||||
6. | Cut out seat bumper locating squares. | |||||||||||||
7. | See Figure 1. Position rear half of template (3) on fender, align locating hole (1) on template with existing hole in rear of fender. | |||||||||||||
8. | Gather two seat bumpers (2) from kit. Remove the paper backing to expose the adhesive. Press the seat bumpers firmly into place. | |||||||||||||
9. | Remove rear half of template from fender. | |||||||||||||
10. | See Figure 2. Position front half of template (3) on fender, align locating hole (1) on template with existing hole in front of fender. | |||||||||||||
11. | Gather two seat bumpers (2) from kit. Remove paper backing to expose the adhesive. Press the seat bumpers firmly into place. |
Figure 1. Rear Half of Template
Figure 2. Front Half of Template | ||||||||||||
12. | Remove template from fender. | |||||||||||||
13. | Install seat. |