0/0
CLUTCH CABLE CONNECTOR COVER
J039102006-03-30
GENERAL
Kit Number
38636-07
Models
This kit fits 2006-later Dyna®, 2007 Softail®, and 2007 Touring models. This kit does not fit models equipped with a hydraulic clutch,
Kit Contents
See Figure 1 and Table 1.
There are no Service Parts available with this kit.
INSTALLATION
  1. See Figure 1. Position the inner (2) and outer (1) halves of the clutch cable connector cover over the clutch cable as shown, with the tapered end away from the clutch release cover (A).
  2. Insert the screws (3) through the counterbored holes in the outer half, threading them into the mating holes in the inner half. Do not tighten the screws at this time.
  3. Slide the clutch cable cover assembly toward the clutch release cover (A), positioning it over the clutch cable fitting and rotating for best fit against the release cover.
  4. Tighten the screws securely.
SERVICE PARTS
Figure 1. Service Parts: Clutch Cable Connector Cover
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Cover, clutch cable connector, outer half
Not Sold Separately
2
Cover, clutch cable connector, inner half
Not Sold Separately
3
Cap screw, socket head, #40-40, chrome (2)
Not Sold Separately
Items mentioned in text, but not included in kit:
A
Clutch release cover