A service manual for your motorcycle is available at your Harley-Davidson dealer.
WARNING
Rider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
Remove and discard existing shifter peg. If necessary, apply heat with a heat gun to shift lever threads and threads on shifter peg to aid peg removal.
NOTE
See Figure 1. Shifter peg casting (1), tread (2) and spacer tube (3) come pre-assembled in kit.
See Figure 1. Install shifter peg assembly to shift lever with screw (4). Orient pattern to desired position and tighten screw to 16.3-19 Nm (12-14 ft-lbs).