CHROME INNER PRIMARY COVER
J045952010-01-24
GENERAL
Kit Number
60885-10
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
Figure 1. Remove Original Equipment Screws 1. 2. 3 and 5 As Shown. Do not remove screw 4.
| 1. | See Figure 1. Remove and discard screws (1, 2, 3 and 5). Do not remove screw (4). | |
| 2. | See Figure 2 and Table 1. Position the inner primary cover (1) over the inner primary housing and primary cover. | |
| 3. | Install new screws. Tighten all four screws to 12.2–13.6 N·m (108–120 in-lbs). | |
| 4. | Install the five Allen hole plug (4) covers to the heads of the five exposed screws. | |
| 5. | Check for proper shift linkage operation and clearance before operating the motorcycle. |
SERVICE PARTS
Figure 2. Service Parts: Chrome Inner Primary Covers
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Inner primary cover | Not Sold Separately |
2 | Screw, 1/4-20 x 5 in. | Not Sold Separately |
3 | Screw, 1/4-20 x 1-1/2 in. (3) | Not Sold Separately |
4 | Hole plug (5) | 94130-93T |