PASSENGER PILLION UPRIGHT KIT
J046632008-05-28
GENERAL
Kit Number
52726-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Required Parts
Separate purchase of a luggage rack (52796-09) and detachable pillion (52689-09) is required. Detachable passenger pillion pad (51782-07 or 52783-07) is optional.
Separate purchase of LOCTITE® 243 Threadlocker and Sealant - Blue is also required. Loctite is available at a Harley-Davidson dealer.
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
INSTALLATION
| 1. | See Figure 1. Install the luggage rack following the instructions in the kit. | |||||||||
| 2. | Insert the ends of the upright (2) into the pillion (3) (purchased separately) and align the holes in the upright with the holes in the pillion. | |||||||||
| 3. | See Figure 2. Apply LOCTITE 243 to screws (2) and install with washers. Tighten screws to 9.5–12.2 N·m (84–108 in-lbs). | |||||||||
| 4. | Install the pillion and upright assembly onto the luggage rack following the instructions in the detachable passenger pillion kit. | 
Figure 1. Upright |
Service Parts
Figure 2. Service Parts: Passenger Pillion Upright
Table 1. Service Parts: Passenger Pillion Upright Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Passenger pillion upright | Not Sold Separately |
2 | Screw, 1/4-20 x 0.75 inch (4) | 3787 |
3 | Washer, 1/4 inch (4) | 6703 |