CHROME CALIPER COVER KIT
J048262009-02-04
GENERAL
Kit Number
44729-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
There are no service parts available for this kit.
INSTALLATION
| 1. | See Figure 1. a. Install the left caliper mounting bracket (2) by removing the caliper mounting bolts (1) that attach the caliper to the fork slider. b. Align the bracket over the holes. c. Install the bolts and alternately tighten the bolts to 38–52 N·m (28–38 ft-lbs). | |||||||
| 2. | See Figure 2. Install the left caliper cover with three screws (1). Tighten the screws to 2.5 N·m (22 in-lbs). | |||||||
| 3. | Repeat all steps for the right side. | 
Figure 1. Install Caliper Mounting Bracket 
Figure 2. Install Caliper Cover Screws |