JIFFY STAND EXTENSION
J054172022-01-10
GENERAL
Kit Number
50000023, 50000263
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNINGRider and passenger safety depend upon the correct installation of this kit.
If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation.
Improper installation of this kit could result in death or serious injury. (00308b)
Additional Parts Required
Proper installation of kit 50000023 requires the use of LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97).
INSTALLATION
| 1. | See Figure 1. Align alignment channel end (1) of extension (1, Figure 2 ) to end of toe bracket (A, Figure 2 ) on top of jiffy stand. | |
| 2. | Mark center of hole location on toe bracket. | |
| WARNING Wear safety glasses or goggles while drilling. Flying debris could result in serious eye injury. (00565b) | ||
| 3. | Drill jiffy stand extension mounting hole (B) into toe bracket of jiffy stand as follows: a. Use a center punch to create a drill point at marked location. b. Use a 3 mm (⅛ in) drill bit and drill a pilot hole at marked location. c. Use a 7 mm (9/32 in) drill bit to drill through pilot hole and enlarge hole. d. Remove any burrs left on drilled hole. | |
| 4. | See Figure 2. Kit 50000023: apply a small amount of threadlocker to threads of screw (4).LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) | |
| 5. | Place extension (1) over jiffy stand toe bracket (A). | |
| 6. | See Figure 2. Secure extension (1) to toe bracket (A) with screw (4), washer (3) and acorn nut (2). Tighten. Torque: 0.8 N·m (8 ft-lbs) Extension screw |
NOTE
Do not step on jiffy stand extension or it may be damaged.
| 1 | Toe bracket locating channel end |
Figure 1. Toe Bracket Locating Channel
SERVICE PARTS
Figure 2. Service Parts: Jiffy Stand Extension
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Extension, jiffy stand | Not Sold Separately |
2 | Nut, acorn, chrome | 94004-90T |
Nut, acorn, black | 10100167 | |
3 | Washer, chrome | 94065-90T |
Washer, black | 6424 | |
4 | Screw, chrome | 94385-92T |
Screw, black | 10200816 | |
Items mentioned in text, but not included in kit. | ||
A | Jiffy stand toe bracket | |
B | Drilled hole, 9/32 inch (7 mm) | |