BURST COLLECTION FUEL DOOR KIT
J059302014-05-13
GENERAL
Kit Number
70900474
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
| 1. | Open the original equipment fuel door. | |
| 2. | Remove the nut securing the lock assembly to the door. | |
| 3. | Remove the lock assembly and transfer it to the Burst fuel door. | |
| 4. | Secure the lock using the nut just removed. Tighten the nut finger tight. | |
| 5. | Remove the two screws securing the original equipment fuel door to the door hinge. | |
| 6. | Remove the door and retain the screws. | |
| 7. | Secure the Burst fuel door to the hinge using the screws just removed. | |
| 8. | Tighten the hinge screws to 2.8–3.4 N·m (25–30 in-lbs). | |
| 9. | Tighten the lock assembly nut to 3.4–4.5 N·m (30–40 in-lbs). |
SERVICE PARTS
Figure 1. Service Parts: Burst Collection Fuel Door Kit
Table 1. Service Parts
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Medallion, 1.6 in. Burst Collection | 14100424 |
2 | Cover, Console Center Fill Burst Collection | Not Sold Separately |