| FASTENER | TORQUE VALUE | NOTES |
|---|---|---|
| ABS module banjo bolts |
23–26 N·m (17–19 ft-lbs) | 3.14 ABS MODULE, Install |
| ABS module bracket screws |
6–8 N·m (53–71 in-lbs) | 3.14 ABS MODULE, Install |
| ABS module cover screw |
6–8 N·m (53–71 in-lbs) | 3.13 BRAKE LINES, Remove and Install: ABS Module Cover |
| ABS module mounting screws |
5.8–7.8 N·m (51–69 in-lbs) | 3.14 ABS MODULE, Install |
| Axle, front |
100–111 N·m (74–82 ft-lbs) | 3.4 FRONT WHEEL, Install |
| Axle, front, pinch screw |
20–24 N·m (15–18 ft-lbs) | 3.4 FRONT WHEEL, Install |
| Axle, rear |
100–111 N·m (74–82 ft-lbs) | 3.5 REAR WHEEL, Install |
| Axle, rear, pinch screws |
20–24 N·m (15–18 ft-lbs) | 3.5 REAR WHEEL, Install |
| Belt guard, lower, grommet screw |
8–10 N·m (71–89 in-lbs) | 3.22 REAR FORK, Assemble |
| Belt guard, lower, screws |
8–10 N·m (71–89 in-lbs) | 3.23 BELT GUARDS, Install |
| Belt guard, upper, screws |
8–10 N·m (71–89 in-lbs) | 3.23 BELT GUARDS, Install |
| Brake caliper bleeder screw |
12–16 N·m (106–142 in-lbs) | 3.15 BLEED BRAKES, Drain |
| Brake caliper bleeder screw |
12–16 N·m (106–142 in-lbs) | 3.15 BLEED BRAKES, Fill and Bleed |
| Brake caliper, front, banjo bleeder bolt |
25.5–28.5 N·m (19–21 ft-lbs) | 3.10 FRONT BRAKE CALIPER, Install |
| Brake caliper, front, mounting screw |
38–52 N·m (28–38 ft-lbs) | 3.10 FRONT BRAKE CALIPER, Install |
| Brake caliper, rear, banjo bolt |
25.5–28.5 N·m (19–21 ft-lbs) | 3.12 REAR BRAKE CALIPER, Install |
| Brake caliper, rear, mounting screw |
38–52 N·m (28–38 ft-lbs) | 3.12 REAR BRAKE CALIPER, Install |
| Brake disc, front, screw |
22–32 N·m (16–24 ft-lbs) | 3.4 FRONT WHEEL, Assemble |
| Brake disc, rear, screw |
22–32 N·m (16–24 ft-lbs) | 3.5 REAR WHEEL, Assemble |
| Brake line bracket screw |
8–10 N·m (71–89 in-lbs) | 3.13 BRAKE LINES, Remove and Install: Bracket |
| Brake line, both front lines, p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Front Master Cylinder to ABS Module |
| Brake line, both front lines, p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Front Caliper to ABS Module |
| Brake line, front caliper to ABS module, p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Front Caliper to ABS Module |
| Brake line, front manifold screw |
6–8 N·m (53–71 in-lbs) | 3.13 BRAKE LINES, Brake Line: Front Caliper to ABS Module |
| Brake line, front master cylinder to ABS module p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Front Master Cylinder to ABS Module |
| Brake line, rear caliper to ABS module, p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Rear Caliper to ABS Module |
| Brake line, rear master cylinder to ABS module, p-clamp screw |
5–7 N·m (44–62 in-lbs) | 3.13 BRAKE LINES, Brake Line: Rear Master Cylinder to ABS Module |
| Brake master cylinder reservoir, rear, screw |
2–2.5 N·m (18–22 in-lbs) | 3.11 REAR BRAKE MASTER CYLINDER, Install |
| Brake master cylinder, front reservoir cover screw |
1.3–1.7 N·m (12–15 in-lbs) | 3.15 BLEED BRAKES, Fill and Bleed |
| Brake master cylinder, front, banjo bolt |
25.5–28.5 N·m (19–21 ft-lbs) | 3.9 FRONT BRAKE MASTER CYLINDER, Install |
| Brake master cylinder, front, clamp screw |
8–10 N·m (71–89 in-lbs) | 3.9 FRONT BRAKE MASTER CYLINDER, Install |
| Brake master cylinder, rear, banjo bolt |
25.5–28.5 N·m (19–21 ft-lbs) | 3.11 REAR BRAKE MASTER CYLINDER, Install |
| Brake master cylinder, rear, screws |
8–10 N·m (71–89 in-lbs) | 3.11 REAR BRAKE MASTER CYLINDER, Install |
| Cosmetic cover screw |
4–8 N·m (35.4–70.8 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Cover, lower-side, screws |
5–7 N·m (44–62 in-lbs) | 3.18 SIDE COVERS, Install |
| Cover, middle-side, screws |
5–7 N·m (44–62 in-lbs) | 3.18 SIDE COVERS, Install |
| Cover, rear, screw |
2–4 N·m (18–35 in-lbs) | 3.17 REAR COVER, Install |
| Cover, top, screws |
5–7 N·m (44–62 in-lbs) | 3.16 TOP COVER, Install |
| Cover, upper-side, screws |
5–7 N·m (44–62 in-lbs) | 3.18 SIDE COVERS, Install |
| Fairing bracket screw, top |
8–10 N·m (71–89 in-lbs) | 3.25 FAIRING, Remove and Install: Brackets |
| Fairing bracket, clamp screw, bottom |
5–7 N·m (44–62 in-lbs) | 3.25 FAIRING, Remove and Install: Brackets |
| Fender, front, screws |
5–7 N·m (44–62 in-lbs) | 3.29 FRONT FENDER, Install |
| Footpeg wear peg |
4–5 N·m (35–44 in-lbs) | 3.33 RIDER FOOTRESTS, Remove and Install: Footpegs |
| Footrest bracket screw |
35–41 N·m (26–30 ft-lbs) | 3.33 RIDER FOOTRESTS, Remove and Install: Bracket |
| Fork bracket, lower, pinch screw |
20–24 N·m (15–18 ft-lbs) | 3.19 FRONT FORK, Install |
| Fork bracket, upper, pinch screw |
20–24 N·m (15–18 ft-lbs) | 3.19 FRONT FORK, Install |
| Fork lock bracket, screw |
2.2–2.8 N·m (19–25 in-lbs) | 3.21 FORK LOCK, Install |
| Fork lock, mounting, screw |
8–10 N·m (71–89 in-lbs) | 3.21 FORK LOCK, Install |
| Fork lock, reinforcement bracket, screw |
2.4–3 N·m (21–27 in-lbs) | 3.21 FORK LOCK, Install |
| Fork piston rod hex nut, left side |
26–30 N·m (19–22 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Left Side |
| Fork piston rod hex nut, right side |
26–30 N·m (19–22 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Right Side |
| Fork stem pinch screw |
20–24 N·m (15–18 ft-lbs) | 3.20 STEERING HEAD/FORK STEM AND BRACKET ASSEMBLY, Install |
| Fork stem screw, 1st torque |
18–20 N·m (13–15 ft-lbs) | 3.20 STEERING HEAD/FORK STEM AND BRACKET ASSEMBLY, Install |
| Fork stem screw, final torque |
11.5–12.5 N·m (102–111 in-lbs) |
3.20 STEERING HEAD/FORK STEM AND BRACKET ASSEMBLY, Install
Loosen 90
o before final tighten
|
| Fork tube cap, left side |
30–40 N·m (22–30 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Left Side |
| Fork tube cap, right side |
30–40 N·m (22–30 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Right Side |
| Fork, rear brace coupler screw |
45–50 N·m (33–37 ft-lbs) | 3.22 REAR FORK, Assemble |
| Frame to RESS screws, left side |
66–72 N·m (49–53 ft-lbs) | 3.37 FRAME, Install |
| Frame to RESS screws, right side |
66–72 N·m (49–53 ft-lbs) | 3.37 FRAME, Install |
| Frame, lower, ground screw |
5–7 N·m (44–62 in-lbs) | 3.37 FRAME, Install |
| Frame, steering head nuts |
58–68 N·m (43–50 ft-lbs) | 3.37 FRAME, Install |
| Frame, steering head nuts |
68–81 N·m (50–60 ft-lbs) | 3.37 FRAME, Install |
| Frame, upper, ground screw |
5–7 N·m (44–62 in-lbs) | 3.37 FRAME, Install |
| Front crossmember screws |
5–6.5 N·m (44–58 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Handlebar Clamp Screw |
20–24 N·m (15–18 ft-lbs) |
3.27 HANDLEBAR, Install
Tighten rear screws first, then front screws.
|
| Jiffy stand nut |
10.8–13.3 N·m (95.6–117.7 in-lbs) | 3.35 JIFFY STAND, Assemble |
| Jiffy stand screws |
20–24 N·m (15–18 ft-lbs) | 3.35 JIFFY STAND, Install |
| Latch plate screws |
2–4 N·m (18–35 in-lbs) | 3.36 TAIL SECTION, Assemble |
| License bracket screw |
8–10 N·m (71–89 in-lbs) | 3.32 REAR LICENSE PLATE BRACKET, Install |
| License bracket support screws |
8–10 N·m (71–89 in-lbs) | 3.31 REAR LIGHTING BRACKET, Assemble |
| Lock screws |
0.7–1.1 N·m (6–10 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Mirror acorn nut |
13.6–19 N·m (10–14 ft-lbs) | 3.28 MIRRORS, Install |
| Mirror bracket screws |
8–10 N·m (71–89 in-lbs) | 3.28 MIRRORS, Install |
| Mud guard screws |
5–7 N·m (44–62 in-lbs) | 3.30 MUD GUARD, Install |
| Rear crossmember screws |
5–6.5 N·m (44–58 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Rear lighting bracket screw |
16–18 N·m (142–159 in-lbs) | 3.31 REAR LIGHTING BRACKET, Install |
| Reflector nut, rear lighting bracket |
1.5–2 N·m (13–18 in-lbs) | 3.31 REAR LIGHTING BRACKET, Assemble |
| Rod guide case, left side |
80–100 N·m (59–74 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Left Side |
| Rod guide case, right side |
80–100 N·m (59–74 ft-lbs) | 3.19 FRONT FORK, Disassemble and Assemble: Inverted, Right Side |
| Seat bracket screws |
4–8.1 N·m (35–72 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Seat latch screws |
4–6 N·m (35–53 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Seat subframe screws |
5–6.5 N·m (44–58 in-lbs) | 3.36 TAIL SECTION, Assemble |
| Shock absorber, rear, nut |
90–110 N·m (66–81 ft-lbs) | 3.24 REAR SHOCK ABSORBER, Install |
| Sprocket, final drive, rear |
30–35 N·m (22–26 ft-lbs) | 3.5 REAR WHEEL, Assemble |
| Tail section screws |
20–24 N·m (15–18 ft-lbs) | 3.36 TAIL SECTION, Install |
| Wireform screw, brake line, front |
5–7 N·m (44–62 in-lbs) | 3.20 STEERING HEAD/FORK STEM AND BRACKET ASSEMBLY, Install |