| 1. | If replacing master cylinder reservoir:Figure 2 Install master cylinder reservoir. a. Install master cylinder reservoir (1). b. Install screw (2). Tighten. Torque: 2–2.5 N·m (18–22 in-lbs) Brake master cylinder reservoir, rear, screw c. Install brake hose (4). d. Move spring clamp (3) into position. | |
| 2. | If replacing master cylinder:Figure 1 Install brake hose. a. Install brake hose (1). b. Move spring clamp (2) into position. | |
| 3. | Figure 2 Install master cylinder. a. Align master cylinder (2) with brake pedal (6). b. Install clevis pin (5) through brake pedal (6) and pushrod. c. Install cotter ring (4). d. Install master cylinder (2) to bracket (1). e. Install screws (3). Tighten. Torque: 8–10 N·m (71–89 in-lbs) Brake master cylinder, rear, screws | |
| 4. | If replacing master cylinder:Figure 3 Attach brake line. a. Attach brake line (3) to master cylinder with banjo bolt (4) and new gasket washers (5). b. Tighten banjo bolt. Torque: 25.5–28.5 N·m (19–21 ft-lbs) Brake master cylinder, rear, banjo bolt |
| 1 | Brake hose |
| 2 | Spring clamp |
| 3 | Brake line |
| 4 | Banjo bolt |
| 5 | Gasket washer (2) |
Figure 1. Master Cylinder Brake Lines
| 1 | Bracket |
| 2 | Master cylinder |
| 3 | Screw (2) |
| 4 | Cotter ring |
| 5 | Clevis pin |
| 6 | Brake pedal |
Figure 2. Rear Brake Master Cylinder
| 1 | Master cylinder reservoir |
| 2 | Screw |
| 3 | Spring clamp |
| 4 | Brake hose |
Figure 3. Rear Master Cylinder Reservoir