Consumables
| Description | Part Number | Size |
|---|---|---|
| LOCTITE 411 PRISM INSTANT ADHESIVE | Loctite 411 | - |
| LOCTITE 770 PRISM PRIMER | Loctite 770 | - |
| 1. | Install left hand grip. a. Prepare the left grip end of the handlebar with emery cloth. b. Clean the left grip end of the handlebar with acetone. c. Apply primer to the inside of the new hand grip.LOCTITE 770 PRISM PRIMER (Loctite 770) d. Remove excess primer. Wait 2 minutes for the primer to set. e. Apply adhesive to the inside of the new hand grip.LOCTITE 411 PRISM INSTANT ADHESIVE (Loctite 411) f. Install the new hand grip with a twisting motion. | |
| 2. | Install left handlebar switch housing. See Electrical → LEFT HAND CONTROL MODULE (LHCM). | |
| 3. | Install mirror and bracket. See Chassis → MIRRORS. |
| 1. | Install hand grip with cosmetic features properly positioned. a. Rotate to verify that internal splines are engaged with the twist grip sensor. | |
| 2. | Install right hand control module. See Electrical → RIGHT HAND CONTROL MODULE (RHCM). | |
| 3. | Install front brake master cylinder to handlebar. See Chassis → FRONT BRAKE MASTER CYLINDER. |