1.	Remove top cover. See Chassis → TOP COVER.
2.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
3.	Tensioner Pulley: a. Detach right rider footrest bracket from frame. See Chassis → RIDER FOOTRESTS. b. Remove primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.
4.	Idler Sprocket: a. Remove right and left rider footrest brackets. See Chassis → RIDER FOOTRESTS. b. Remove primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER. c. Loosen tensioner. See Remove and Install: Tensioner Pulley in this section. d. Raise rear wheel for service. See Maintenance → GENERAL.
5.	Idler Bracket: a. Remove right and left rider footrest brackets. See Chassis → RIDER FOOTRESTS. b. Remove primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER. c. Remove tensioner. See Remove and Install: Tensioner Pulley in this section. d. Remove battery box. See Electrical → BATTERY BOX. e. Remove pivot shaft from rear fork. See Chassis → REAR FORK. NOTE Support rear fork assembly.