Consumables
| Description | Part Number | Size |
|---|---|---|
| GENUINE HARLEY-DAVIDSON EXTENDED LIFE ANTIFREEZE & COOLANT | 26800188 or 26800191 | 1 L (1 qt) |
WARNINGDo not loosen or remove pressure cap when cooling system is hot. The cooling system is under pressure and hot coolant and steam can escape from pressure cap, which could cause severe burns. Allow motorcycle to cool before servicing the cooling system. (00091c)
NOTE
- Check coolant level with cooling system cold and motorcycle upright.
- If the coolant level is not registering when the system is cold, inspect the system for leaks. Repair as needed. Fill system with coolant and purge any trapped air.
| 1. | Allow system to cool. | |
| 2. | Remove top cover. See Chassis → TOP COVER. | |
| 3. | See Figure 1. Check coolant level. a. Check that filler neck is at or slightly above the COLD line (1). | |
| 4. | If level is below COLD line, add coolant. a. Remove filler neck cap. b. Add coolant until fluid level reaches COLD line.GENUINE HARLEY-DAVIDSON EXTENDED LIFE ANTIFREEZE & COOLANT (26800188 or 26800191) c. Install filler neck cap. | |
| 5. | Install top cover. See Chassis → TOP COVER. |
| 1 | Filler neck COLD line |
Figure 1. Coolant Level