Remove
| 1. | See Figure 1. Remove footpeg. a. Remove e-clip (5). b. Remove clevis pin (2). NOTE Remove footpeg and detent plate as an assembly to keep spring and ball (4) in place. c. Remove footpeg (3) with detent plate (6). | |
| 2. | NOTE Detent ball is under spring pressure, place finger over detent ball when removing detent plate to keep detent ball from falling out. | |
| 3. | Remove spring and ball (4) from footpeg. |
Install
| 1. | See Figure 1. Install spring and ball (4) into footpeg (3). | |
| 2. | Install detent plate (6) onto footpeg (3). a. Hold detent ball in place while installing detent plate to prevent detent ball from falling out. b. Detent plate should be oriented with the detent holes on the bottom. c. Make sure detent ball is aligned with the innermost hole in the detent plate when installed. | |
| 3. | Install footpeg. a. Install footpeg (3) into footpeg bracket (1). b. Install clevis pin (2). NOTE When installing e-clip, use e-clip tool to help prevent damage to painted surfaces. c. Install e-clip (5). |
| 1 | Bracket |
| 2 | Clevis pin |
| 3 | Passenger footpeg |
| 4 | Spring and ball |
| 5 | E-clip |
| 6 | Detent plate |
Figure 1. Passenger Peg Assembly