| 1. | See Figure 1. Install BCM. a. Install BCM (1) into BCM caddy (4). b. Connect both connectors to BCM. NOTE When installing battery power connector verify seal does not roll. |
| 1 | BCM |
| 2 | Locking clips |
| 3 | Connectors |
| 4 | BCM caddy |
Figure 1. BCM and Caddy
| 1. | See Figure 1. Install BCM. a. Install BCM (1) into BCM caddy (4). b. Connect both connectors to BCM. NOTE When installing battery power connector verify seal does not roll. |
| 1 | BCM |
| 2 | Locking clips |
| 3 | Connectors |
| 4 | BCM caddy |