Arming

When the motorcycle is parked and the OFF/RUN switch is moved to OFF, the security system arms automatically within five seconds if no motion is detected. Even when the fob is present, the system arms.

On arming, the turn signals flash twice. While armed, the indicator lamp on the instrument module flashes every three seconds.

Disarming

With the fob present, the rider may ride or move the motorcycle for parking, storage or service without setting off the alarm. Disarming is automatic as long as the fob is within range.

Fob: An armed security system is automatically disarmed when the fob is present and the motorcycle is moved or the OFF/RUN switch is moved to RUN.

The range of the fob is 1.5 m (5ft).

When the system disarms, the security indicator lamp illuminates for a solid four seconds and then turns off.

Personal identification number (PIN): If the fob is misplaced or if the present fob fails to communicate, the system can be disarmed with the personal identification number (PIN). Refer to Table 1.

Disarming with a PIN

Disarm the security system manually using the PIN if the fob is lost, the fob battery is discharged or if where you parked there is a strong electromagnetic interference.

Do not turn handlebars, straddle seat or lift motorcycle off the jiffy stand. During a PIN disarm, if the security system detects motorcycle motion the system will activate the alarm.

NOTE

If a mistake is made while entering PIN, move the OFF/RUN switch to OFF before entering the last digit and then start the procedure from the beginning.
If the procedure fails to disarm the security system, wait two minutes before attempting another PIN disarm.
The security system remains disarmed until the OFF/RUN switch is moved to OFF.
At any time during a PIN disarm if the fob is brought within range, the security system disarms as the module receives the coded signal from the fob.

Table 1. Entering a PIN to Disarm Security System

STEP NO.	ACTION	WAIT FOR CONFIRMATION	NOTES
1	If necessary, verify the current 5-digit PIN.
2	Push the OFF/RUN switch to RUN.	The Instrument Module (IM) display will show ENTER PIN dialog.
3	Press and release the first digit of the PIN on the displayed number pad.	The selected digit will now be displayed as the first digit of the PIN on the IM.
4	Press and release the second digit of the PIN on the displayed number pad.	The selected digit will now be displayed as the second digit of the PIN on the IM.
5	Press and release the third digit of the PIN on the displayed number pad.	The selected digit will now be displayed as the third digit of the PIN on the IM.
6	Press and release the fourth digit of the PIN on the displayed number pad.	The selected digit will now be displayed as the fourth digit of the PIN on the IM.
7	Press and release the fifth digit of the PIN on the displayed number pad.	The selected digit will now be displayed as the fifth digit of the PIN on the IM.	After fifth digit of PIN is entered the Smart Security System is disarmed.