See Figure 1. The front panel consists of a set of pushbuttons, a liquid crystal display, (LCD), a protective door for the Compact Disc (CD/MP3) slot and a covered input port for auxiliary (AUX) players. Six of the pushbuttons are "soft keys" whose function will change with the display.
ON
ON to turn the receiver on and off.
1, 2, 3, 4, 5/Left Arrow
For the stereo receiver, the soft keys, 1, 2, 3, 4, and 5/Left Arrow, are used to store and then recall a selected radio frequency (pre-sets). When combined with any of the Advanced Audio System accessories, the function of any active soft key for that accessory will be displayed next to the soft key in the LCD display.
6
Pressing the 6 soft key will return the display to the previous menu. For CB and Intercom Setup, the function of the 6 soft key will be displayed in the LCD next to the 6 soft key.
5/Left, Up, Down, Right Arrows
The 5/Left, Up, Down, and Right Arrow soft keys are used for radio band frequency tuning, Bass and Treble mixing, Fader and Volume. They are also used to scroll and highlight a selection in a list. For an Advanced Audio System accessory module, the arrow keys are active when arrows appear in the display.
OK
With a menu or list item highlighted, press the OK pushbutton to confirm the selection and initiate the function.
COM
COM is the Citizen Band (CB) setup button. See ADVANCED AUDIO SYSTEM → CB Operation. Press the COM pushbutton to display the CB Setup menu.
INT
INT is the intercom setup button. See ADVANCED AUDIO SYSTEM → Intercom Operation. Press the INT pushbutton to display the Intercom Setup menu.
NOTE
With the headsets/microphones plugged into the rider and/or passenger intercom sockets, the intercom is voice activated (VOX).
NAV
Active only with the Advanced Audio System accessory, NAV is the GPS positioning and turn-to-turn navigation setup button. Press the NAV pushbutton to display the navigational menu.
LCD
The liquid crystal display (LCD) displays the operational status of the stereo receiver and that of any accessory.
CD Door
The CD door is a spring-loaded cover and will stay open when exchanging CDs.
Close the CD door after loading or unloading a CD. To close the door, push the door down until it latches.
EJECT
The CD EJECT button is found under the CD cover. Press the EJECT pushbutton to eject the CD.
AUX
The auxiliary input port under the AUX cover connects the receiver to an auxiliary device such as a cassette or MP3 player.
Use a 1/8 in. (3.5 millimeter) male to male extension cord to plug the line out or headset out from the auxiliary device into the AUX port. AUX appears in the LCD as a mode selectable with the MODE SEL switch.
The user has control of Bass, Treble, Fader and Volume, if so equipped, but all other player functions are performed with the auxiliary device. Set the volume level of the AUX device to normal or average.
NOTE
Close the protective cap whenever the AUX port is not in use.
| 1 | Communications (CB) setup (if equipped) |
| 2 | CD cover |
| 3 | EJECT (under cover) |
| 4 | OK (Confirm) |
| 5 | Auxiliary connector cover |
| 6 | Left (5), Up, Right, Down Arrow Keys |
| 7 | Soft keys (4, 5/Left Arrow, 6) |
| 8 | Liquid crystal display (LCD) |
| 9 | Soft keys (1, 2, 3) |
| 10 | ON key |
| 11 | GPS navigation module (if equipped) |
| 12 | Intercom setup (if equipped) |
Figure 1. Advanced Audio System Front Panel