Check the transmission lubricant level with engine turned off and motorcycle on level surface.
NOTE
Allow vehicle to rest for a few moments before checking lubricant level. This will allow lubricant level to normalize.
| 1. | See Figure 1. Remove transmission lubricant dipstick. Wipe dipstick clean. | |
| 2. | Thread dipstick into transmission finger tight. | |
| 3. | See Figure 2. Remove dipstick and check lubricant level on dipstick. If lubricant level is at or below the ADD mark on the dipstick, add only enough lubricant to bring level to between ADD mark and FULL mark on dipstick. | |
| 4. | Install dipstick. Tighten to 2.8–8.5 N·m (25–75 in-lbs). |
Table 1. Recommended Lubricant
LUBRICANT | REFILL QUANTITY * |
|---|---|
FORMULA+ TRANSMISSION AND PRIMARY CHAIN LUBRICANT or SCREAMIN' EAGLE SYN3 FULL SYNTHETIC MOTORCYCLE LUBRICANT 20W50 | 0.83 L (28 fl oz) |
*Approximate. Check and add as needed to bring level within
specification. | |
Figure 1. Transmission Dipstick Location
| 1 | Add |
| 2 | Full |
Figure 2. Transmission Dipstick Lubricant Level