UP/MODE SEL/DN Switch

See Figure 1. The passenger MODE SEL switch on the left side of the speaker box gives the passenger control of radio band selection, tuning, CD/MP3 operation and all functions of the hand grip mounted MODE SEL switch.

NOTE

For information on routing audio signals to the passenger speakers and headsets, refer to ADVANCED AUDIO SYSTEM → Audio Routing and Mixing → Audio Routing and Mixing Combinations.

PTT and +/VOL/- Switch

See Figure 1. The PTT/+/VOL/- switch on the right side of speaker box allows the passenger to talk over the intercom or transmit over the CB as well as to raise or lower the rear headset volume.

See E in ADVANCED AUDIO SYSTEM → CB Operation → Display Examples. When the rear headset volume is adjusted, a F (front) and R (rear) bar graph appear in the LCD display.

NOTE

The passenger VOL switch affects only the passenger headset. The handlebar mounted AUDIO switch is the master volume control, and used in conjunction with the FADER, affects both the rider and passenger speaker volume.
With stereo receiver tuning, radio band selection, CD/MP3 track selection or other functions, simultaneous use of front and rear MODE SEL switches may cause operation to be suspended until either rider or passenger controls are released.

1	Passenger headset socket
2	UP/MODE SEL/DN switch
3	PTT / +/VOL/- switch

Figure 1. Passenger Controls