The Personal Identification Number (PIN) is a number that can be used to disarm the Harley-Davidson Smart Security System in case an assigned fob is misplaced, fails or if the fob and module cannot communicate because of electromagnetic interference.
A PIN is a five-digit number (1-9, no zeros).
Changing the PIN
To maintain security, the rider can change the PIN at any time. Refer to Table 1.
Table 1. Changing the PIN
STEP
NO.
ACTION
WAIT FOR CONFIRMATION
NOTES
1
Select a 5-digit (1 thru 9) PIN and record on the wallet card from Owner's Manual.
2
With an assigned fob present, turn IGN key IGNITION-OFF-IGNITION-OFF-IGNITION.
3
Press left turn signal switch 3 times.
4
Press right turn signal switch 1 time and release.
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.
5
Enter first digit (a) of new PIN by pressing leftturn signal switch a times.
6
Press right turn signal switch 1 time and release.
The new digit (a) will replace the current in odometer window.
7
Enter second digit (b) of new PIN by pressing left turn signal switch b times.
8
Press right turn signal switch 1 time and release.
The new digit (b) will replace the current in odometer window.
9
Enter third digit (c) of new PIN by pressing left turn signal switch c times.
10
Press right turn switch 1 time and release.
The new digit (c) will replace the current in odometer window.
11
Enter fourth digit (d) of new PIN by pressing left turn signal switch d times.
12
Press right turn switch 1 time and release.
The new digit (d) will replace the current in odometer window.
13
Enter fifth digit (e) of new PIN by pressing left turn signal switch e times.
14
Press right turn switch 1 time and release.
The new digit (e) will replace the current in odometer window.
15
Before the module rearms, turn the ignition key to OFF.
The odometer will return to mileage.
Turning the ignition key to OFF stores the new PIN in the module.
1Current PIN (example) on PIN Change
2PIN Disarm
Figure 1. Odometer Windows - PIN