Check the transmission lubricant level with engine turned off and motorcycle on level surface.
NOTE
Allow motorcycle to rest for a few moments before checking lubricant level. This allows lubricant level to normalize.
| 1. | See Figure 1. Remove transmission filler plug/dipstick. Wipe dipstick clean. | |
| 2. | Insert dipstick into transmission. Turn dipstick in until O-ring contacts case. Do not tighten. | |
| 3. | See Figure 2. Remove dipstick and check lubricant level on dipstick. If lubricant level is at or below the ADD (A) mark on the dipstick, add only enough lubricant to bring level to between ADD (A) mark and FULL (F) mark on dipstick. | |
| 4. | Install dipstick. Tighten to 2.8–8.5 N·m (25–75 in-lbs). |
Table 1. Recommended Transmission Lubricants
LUBRICANT | QUANTITY * | |
|---|---|---|
fl oz | L | |
FORMULA+ TRANSMISSION AND PRIMARY CHAINCASE LUBRICANT | 28 | 0.83 |
SCREAMIN' EAGLE SYN3 FULL SYNTHETIC MOTORCYCLE LUBRICANT 20W50 | 28 | 0.83 |
* Fill quantity for a transmission lubricant change. | ||
Figure 1. Transmission Filler Plug/Dipstick Location
| 1 | Add (A) |
| 2 | Full (F) |
Figure 2. Transmission Lubricant Level