1 | Perpendicular line |
2 | Vertical centerline |
3 | 25 ft (7.6 m) |
4 | High beam bulb centerline |
5 | Horizontal line 2.1 in (53.3 mm) lower than bulb centerline |
1. | Point the front wheel straight forward. | |
2. | See Figure 2. Loosen horizontal adjustment screw (2). Tilt headlamp left or right to direct light beam straight ahead. | |
3. | Tighten screw (2) to 40.7–47.5 N·m (30–35 ft-lbs). | |
4. | Loosen vertical adjustment screw (1). Tilt headlamp up or down until light beam hot spot is located over the intersection of lines. | |
5. | Tighten vertical adjustment screw (1) to 47.5–61 N·m (35–45 ft-lbs). |
1 | Vertical adjusting screw |
2 | Horizontal adjusting screw |