Main Fuse
See Figure 1. A 50 amp main fuse is located near the fuse block. Removing the main fuse disconnects power to all systems except the starter motor/solenoid.
If equipped with security system siren, turn the ignition switch ON with the hands-free fob present to disarm the security system before removing the main fuse or siren will sound.
NOTE
Place the ignition switch in the OFF position before installing the main fuse.
System Fuses
NOTICE
Do not skip any steps for fuse replacement. Skipping fuse replacement steps can result in damage to the sound system and/or other motorcycle systems. (00223a)
See Figure 1. Fuses are located under left side cover.
If fuse replacement does not correct a problem, see a Harley-Davidson dealer for electrical diagnosis.
| 1. | Place the ignition switch in the OFF position. | |
| 2. | Remove left side cover. See Maintenance and Lubrication → Side Covers. | |
| 3. | Press in tabs on the left and right sides of fuse block cover. Remove the cover. | |
| 4. | See Figure 2. Remove fuse and inspect the element. | |
NOTICE Always use replacement fuses that are of the correct type and amperage rating. Use of incorrect fuses can result in damage to electrical systems. (00222a) | ||
| 5. | Replace the fuse if the element is burned or damaged. NOTE Use automotive-type fuses for replacements. Two spare fuses can be found in the fuse block. | |
| 6. | Install the fuse block cover. | |
| 7. | Install left side cover. |
| 1 | Fuse block cover |
| 2 | Main fuse |
| 3 | Press tabs to remove |
Figure 1. Fuse Block (under left side cover)
| 1 | Radio power (20 A) |
| 2 | System power (7.5 A) |
| 3 | Battery (5 A) |
| 4 | P&A (20 A) |
| 5 | Cooling (10 A) |
| 6 | Spare (5 A) |
| 7 | P&A relay |
| 8 | Cooling relay |
| 9 | Spare (7.5 A) |
| 10 | Spare (20 A) |
| 11 | Main fuse (50 A) |
Figure 2. Fuses