1. | See Figure 1. Remove transmission lubricant dipstick. Wipe dipstick clean. | |
2. | Insert dipstick into transmission. Thread dipstick in until O-ring makes contact with case. Do not tighten. | |
3. | See Figure 2. Remove dipstick and check lubricant level on dipstick. If lubricant level is at or below the ADD (A) mark on the dipstick, add only enough lubricant to bring level to between ADD (A) mark and FULL (F) mark on dipstick. | |
4. | Install dipstick. Tighten to 2.8–8.5 N·m (25–75 in-lbs). |
LUBRICANT | REFILL QUANTITY * |
---|---|
FORMULA+ TRANSMISSION AND PRIMARY CHAIN LUBRICANT or SCREAMIN' EAGLE SYN3 FULL SYNTHETIC MOTORCYCLE LUBRICANT 20W50 | 0.83 L (28 fl oz) |
*Approximate. Check and add as needed to bring level within
specification. |
1 | Add (A) |
2 | Full (F) |