NOTE
Do not remove trim ring for headlamp adjustment.
Set LED headlamp to low beam.
See
Figure 1
. Insert a 5/32 ball end hex wrench through adjuster slots in trim ring.
Horizontal:
Turn the horizontal adjusting screw (1) to adjust light beam left and right.
Vertical:
Turn the vertical adjusting screw (2) to adjust light beam up and down.
See
Maintenance and Lubrication → Auxiliary
. Adjust headlamp to center light beam as shown.
View interactive image
1
Horizontal adjuster
2
Vertical adjuster
Figure 1. Headlamp Adjusters (typical)