UP/MODE and SEL/DN Switch
See Figure 1. The passenger mode selection (MODE SEL) switch gives the passenger control of radio band selection, tuning, CD operation and all functions of the hand grip mounted MODE SEL switch.
NOTE
For information on routing audio signals to the passenger speakers and headsets, refer to Premium Sound System → Audio Routing and Mixing → Audio Routing and Mixing Combinations.
PTT and +/VOL/- Switch
See Figure 1. The push to talk (PTT) and volume (VOL) switch on the right side of speaker box allows the passenger to talk over the intercom or transmit over the CB as well as to raise or lower the rear headset volume.
When the rear headset volume is adjusted, REAR VOL appears in the upper LCD.
| 1 | Passenger headset socket |
| 2 | UP/MODE SEL/DN switch |
| 3 | PTT / +/VOL/- switch |
Figure 1. Passenger Controls
NOTE
- The passenger VOL switch affects only the passenger headset. The hand grip mounted AUDIO switch is the master volume control, and used in conjunction with the FADER, affects both the rider and passenger speaker volume.
- Rider and passenger headset volume cannot be adjusted at the same time. Whoever has first use of their respective volume control has priority. With regard to stereo receiver tuning, radio band selection, CD track selection or other functions, simultaneous use of front and rear MODE SEL switches may cause operation to be suspended until either rider or passenger controls are released.