Passenger footboards and passenger footrests (FLHRS models only) can be adjusted to one of three positions. Before moving to a new position, remove plastic plugs from holes in rear swingarm brackets as necessary.

1.	See Figure 1 for all models except FLHRS. Remove socket screw with lockwasher to remove footboard bracket from rear swingarm bracket.
2.	Insert pin on footboard bracket into hole in swingarm bracket at position required.
3.	Install socket screw with lockwasher. Tighten socket screw to 20–24 N·m (15–18 ft-lbs).

Figure 1. Passenger Footboards: All Except FLHRS