UP/MODE and SEL/DN Switch
The mode select (MODE SEL) switch is located on the right handlebar switch assembly.
MODE SEL: With the radio POWER on, press and release the MODE SEL switch to sequence between the radio band modes.
When a CD is inserted into the CD player the CD function is added to the selections. When a 1/8 in. (3.5 mm) connector is plugged into the AUX input port the AUX function is added to the selections.
UP/DN: Allows up or down radio station tuning in Manual, SEEK and SCAN. In CD mode, changes tracks and performs fast advance and fast reverse. In the CB mode, the MODE SEL switch changes the CB channel. In the intercom mode, the MODE SEL switch changes the voice activated microphone (VOX) sensitivity.
Table 1. Mode Selections
STYLE | DOMESTIC | INT. | JAPANESE |
---|
Default | AM | LW | MW |
FM1 | MW | FM1 |
FM2 | FM1 | FM2 |
WB | FM2 | |
If present | CD | CD | CD |
AUX | AUX | AUX |
NOTE
The intercom and CB can be activated at the same time with the receiver modes. The intercom and CB signals are passed to the audio circuits only if the signal strength exceeds the threshold established by CB squelch or VOX microphone sensitivity levels. Depending on the position of the speaker control switch, the receiver function, the CB, and the VOX microphone can be heard in the headsets simultaneously. See
Premium Sound System → CB Operation and
Premium Sound System → Intercom Operation.
Figure 1. UP/MODE SEL/DN Switch (Ultra Classic Shown)