Adjustment: XL 1200X/C/CP

1.	Set horizontal adjustment: a. See Figure 1. Loosen the horizontal adjustment screw (3). b. Turn the headlamp right or left as necessary to direct the light beam straight ahead. c. Tighten the horizontal adjustment screw to 40.7–47.5 N·m (30–35 ft-lbs).
2.	Set vertical adjustment: a. See Figure 1. Loosen the locknut (1) for the vertical adjustment bolt. b. Tilt headlamp up or down to properly aim it at the horizontal line on the wall. c. Tighten headlamp locknut to 40.7–47.5 N·m (30–35 ft-lbs).

1	Locknut
2	Vertical adjustment bolt
3	Horizontal adjustment screw

Figure 1. Headlamp Adjustment: XL 1200X/C/CP

Adjustment: All Models except XL 1200X/C/CP

1.	See Figure 2. Remove snap plug (1) on top of headlamp bracket (2).
2.	Loosen headlamp clamp nut (3).
3.	Tilt headlamp up or down to properly aim it in relation to the horizontal line and, at the same time, turn it right or left to direct light beam straight ahead.
4.	Tighten headlamp clamp nut to 14–27 N·m (120–240 in-lbs) after lamp is properly positioned. Install snap plug in headlamp bracket.

1	Snap plug
2	Headlamp bracket
3	Clamp nut

Figure 2. Headlamp Adjustment: Except XL 1200X/C/CP