Removal
- See Figure 1. Lift the rear of pillion to disengage grommet from the seat post.
- Pull pillion out from tail section.
Installation
- See Figure 1. Insert pillion into trunk, aligning tabs on pillion with the slots in the trunk.
- Push down firmly on rear of pillion until grommet fully engages the seat post.
WARNINGAfter installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b)
| 1 | Pillion |
| 2 | Tabs |
| 3 | Seat post |
Figure 1. Passenger Pillion: XR 1200X