FREE PLAY | INCHES | MILLIMETERS |
---|---|---|
COLD engine | 3/8-1/2 | 9.5-12.7 |
HOT engine | 1/4-3/8 | 6.3-9.5 |
1 | Measurement point between sprockets |
2 | Free play measurement |
1. | See Figure 2. Loosen locknut (1). | |
2. | Turn chain adjuster screw (2) clockwise (inward) to reduce free play or counterclockwise (outward) to increase free play. Vertical free play must fall within the limits specified. Refer to Table 1. NOTE If vertical free play cannot be set within the limits specified, then primary chain and/or chain adjuster are worn beyond adjustment limits. Replace parts as necessary. | |
3. | When tension is set correctly, hold chain adjusting screw and tighten locknut to 27–34 N·m (20–25 ft-lbs). | |
4. | Install primary chain inspection cover and new gasket. Tighten hex socket screws to 9.5–13.5 N·m (84–120 in-lbs). | |
5. | Install main fuse. |
1 | Locknut |
2 | Chain adjuster screw |
3 | Transmission chaincase drain plug |