1. | Slide the front of the pillion to engage the notches in the pillion bracket with the seat mounting screws. | |
2. | Tighten thumbscrew with washer to secure pillion to rear fender. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
3. | Pull up on pillion to verify that it is properly secured. |
1. | Slide seat toward front of motorcycle to engage the tongue into the slot in the frame back while lowering the rear of the seat onto the seat mounting posts. | |
2. | Install seat mounting screws. Tighten securely. | |
3. | Install the pillion, if desired. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
4. | Pull up on seat and pillion to verify that it is properly secured. |
1 | Pillion thumbscrew |
2 | Pillion |
3 | Seat screws |
4 | Seat |
5 | Seat mounting studs |