1. | See Figure 1. Slide seat forward until the tongue (1) fits snugly in frame. | |
2. | Push seat forward and press firmly in center until keyhole (2) on underside of seat locks firmly to post on frame. | |
| ![](/sip/blaise/resources/artwork/publication/icon-warning.png) WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) |
3. | Pull up on seat to verify that it is locked in place. | |
4. | Install screw and fasten seat mounting bracket to top of rear fender. | |
5. | Tighten mounting bracket screw. | |
6. | Pull up on seat again to verify that it is properly secured, in all three mounting points. | |
Figure 1. Seat: Sportster Models