Fob Assignment
See Figure 1. Fobs are electronically assigned to the Security System by a Harley-Davidson dealer. Up to two fobs can be assigned at any one time.
Replacement fobs can be purchased from a dealership but can only be assigned to the motorcycle by a trained Harley-Davidson technician.
NOTE
  • The reusable label found on the fob packaging lists the serial number of the fob. For reference, affix the label to a blank "NOTES" page in this Owner's Manual.
  • The serial number of the fob is also found on the inside of the fob. See SECURITY SYSTEM → Fob Battery.
  • The module will arm only if the fob has been assigned by a Harley-Davidson dealer and a Personal Identification Number (PIN) has been entered in the system. Write the PIN on the Personal Information page in the front of this Owner's Manual and on the removable wallet card.
  • If the fob is misplaced or the fob fails, refer to the wallet card and use the PIN to manually disarm the system. Refer to SECURITY SYSTEM → Arming and Disarming and SECURITY SYSTEM → Troubleshooting.
  • The rider can change the PIN at any time. Refer to SECURITY SYSTEM → Arming and Disarming.
Riding with a Fob
Riding without a Fob
If the motorcycle is ridden off without the fob, the odometer window temporarily displays "NO FOB". If the motorcycle is stopped and the ignition turned to OFF, disarm the security system with the PIN and restart the motorcycle.
Figure 1. Fob: Security System