Bulb Replacement
- See Figure 1. Remove the lens.
- Turn the bulb 1/4 turn while pressing the bulb into the housing.
- Remove the bulb.
- Replace the bulb and reinstall the lens.
NOTE
If after replacing bulb the tail lamp will not light, check the wiring, the ground at the socket and/or the switch.
| 1 | Screws (3) |
| 2 | Tail lamp connector |
| 3 | Lamp housing |
| 4 | Lens |
| 5 | Nuts (3) |
| 6 | Rubber grommet |
Figure 1. Tail Lamp Assembly: FLSTSC/FLSTN