NOTE
Headlamp adjustment can be performed without removing the headlamp trim ring.
See
Figure 1
. Using adjuster slots in trim ring, insert Phillips screwdriver between headlamp trim ring and rubber gasket.
Horizontal:
Turn the horizontal adjusting screw to adjust light beam left and right.
Vertical:
Turn the vertical adjusting screw to adjust light beam up and down.
Adjust the light beam until it is centered as shown in
Maintenance and Lubrication → Headlamp Alignment → Check Headlamp Alignment
.
View interactive image
1
Horizontal adjuster
2
Vertical adjuster
Figure 1. Headlamp Adjusters (typical)