SPKR Switch
A three position speaker (SPKR) switch is located on the inner fairing cap of the FLHTCU and the FLTR. See Figure 1.
NOTE
The SPKR switch found on the FLTR is inoperable.
Off/Forward: In the forward position, the speakers are off. Audio (radio, CD/MP3, AUX and CB) is played in the headsets only. During simultaneous CB reception, the other audio source is muted and only the CB is heard in the headsets.
Center: In the center position, the radio, CD/MP3 player or AUX is played over the speakers while the CB is played only in the headsets.
On/Rearward: In the rearward position, the speakers are on. With the SPKR indicator lit, the radio, the CD/MP3 player, or any AUX device and the CB are played through both the rider and passenger speakers. When a CB signal is received, other audio sources mute and the CB is played over the speakers. Refer to ADVANCED AUDIO SYSTEM → Audio Routing and Mixing → Audio Routing and Mixing Combinations.
NOTE
The intercom is only heard in the headsets, regardless of the SPKR switch position.
Figure 1. FLHTCU SPKR Switch
Rider to Passenger Speaker Balance
The receiver FADER control balances the front rider and rear passenger speakers.
NOTE
FADER is available only on the FLHTCU equipped with rider front and passenger rear speakers.
FADER: With the fairing speaker switch in either the SPKR or center position, press the AUDIO switch to cycle through Bass to Treble to Fade in the LCD. Or with the motorcycle stationary, press the left hand AUDIO switch once to enter the Bass display and select Fade with the MODE SEL switch or with the soft key.
The LCD displays the word Fader and a row of outlined rectangles. The smaller center rectangle indicates equal balance between front and rear speakers. A single solid rectangle moves left or right of the center dash as the balance of volume is switched from the passenger speakers (to the left) to the rider speakers (to the right). See C in ADVANCED AUDIO SYSTEM → CB Operation → Display Examples.