Adjust FLHR/FLHT Headlamp
NOTE
Headlamp adjustment can be performed without removing the headlamp door (chrome ring).
- See Figure 1. Using adjuster slots in headlamp door, insert Phillips screwdriver between headlamp housing and rubber gasket.
- See Figure 2. Adjust beam.
- Horizontal: Turn the horizontal adjusting screw to adjust headlamp horizontally.
- Vertical: Turn the vertical adjusting screw to adjust headlamp vertically.
| 1 | Headlamp door |
| 2 | Slot |
Figure 1. Headlamp Door
| 1 | Vertical adjusting screw |
| 2 | Horizontal adjusting screw |
Figure 2. Headlamp Adjustment: FLHT, FLHX, FLHTC, FLHTCU, FLHR and FLHRC
Adjust FLTR Headlamps
- See Figure 3. Using a 4.5 mm deepwell socket with a flexible driver, rotate hex adjusters located near bottom edge of inner fairing.
- Adjust beam.
- Horizontal: Turn either the left or right adjuster to adjust headlamp horizontally.
- Vertical: Turn both adjusters equally to adjust headlamp vertically. Refer to Table 1 for directions to move headlamp beam.
| 1 | Hex adjuster |
Figure 3. Headlamp Adjustment: FLTR
Table 1. FLTR Hex Adjuster Rotation
HEX ADJUSTER | ROTATION | BEAM MOVEMENT |
|---|---|---|
Left only | clockwise | to the right |
Right only | counterclockwise | |
Left only | counterclockwise | to the left |
Right only | clockwise | |
Left and right equally | clockwise | upward |
Left and right equally | counterclockwise | downward |