Warnings
Once armed, if the motorcycle is moved or lifted up off of its jiffy stand and the fob is not present, the alarm will warn the operator with three alternate flashes of the turn signals and a chirp of the siren (if equipped).
Within four seconds, if the motorcycle is back on its jiffy stand and no further motion is detected, the system will remain armed without activating the alarm.
If the motorcycle motion continues, the system will issue a second warning a few seconds after the first.
NOTE
During warnings and alarms, the starter motor and the ignition circuits remain disabled.
Alarm Activation
If the security system is still detecting motion after a second warning, the system will activate the alarm.
When activated, the security system will:
Duration: If motorcycle motion is detected the system will repeat the 30 second alarm and will continue to check for motion. The alarm will repeat this 30 second alarm cycle for 5 minutes (10 cycles) or until no more motion is detected. The alarm will then deactivate.
NOTE
The alarm will also activate the LED, vibration or audible modes of an optionally purchased Harley-Davidson Security Pager. See a Harley-Davidson dealer for details.