NOTE
Headlamp adjustment can be performed without removing the headlamp trim ring.
  1. See Maintenance and Lubrication → Headlamp Bulb Replacement: FLD Model → Headlamp: FLD Model. Using adjuster slots in trim ring, insert Phillips screwdriver between headlamp trim ring and rubber gasket.
    1. Horizontal: Turn the horizontal adjusting screw to adjust light beam left and right.
    2. Vertical: Turn the vertical adjusting screw to adjust light beam up and down.
  2. Adjust the light beam until it is centered as shown in Maintenance and Lubrication → Headlamp Alignment → Checking Headlamp Alignment.