Ignition Switch
The ignition switch controls electrical functions of the motorcycle. The ignition switch also locks the front fork.
See Figure 1. Unlock the switch with the ignition key and rotate the switch to the desired position. Refer to Table 1.
Remove the key after parking the motorcycle and locking the fork.
NOTE
The headlamp and tail lamps operate when the switch is in the IGNITION position, as required by law in some localities.
To start the engine, see Operation → Starting the Engine.
Figure 1. Ignition and Fork Lock Switch
Table 1. Ignition Switch
POSITION | FUNCTION |
|---|---|
OFF | Turns off ignition, lamps and accessories. Motorcycle is turned off and cannot be
started. |
ACC | Turns on accessories. Instrument lamps
are on. Brake lamp and horn can be activated. |
IGNITION | Turns on ignition, lamps and accessories. |
LOCK | Locks front fork. |
Fork Lock
NOTICE
Turn the ignition switch to the OFF position before locking the motorcycle. Leaving the switch in the ACC position will keep the instrument lights on and result in a discharged battery. (00492b)
NOTICE
Protect your vehicle against theft. After parking your motorcycle, lock the steering head and ignition switch. Failure to lock your motorcycle can result in theft and/or equipment damage. (00491c)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
Park your vehicle and use the fork lock to discourage unauthorized use or theft of your motorcycle.
- Turn the fork to the full left position.
- See Figure 1. Insert the key into the ignition switch.
- Push the key in and turn to LOCK position.
- Remove the key.