It is possible to arm the security system without enabling the motion detector for one ignition cycle. This allows the vehicle to be picked up and moved in an armed state, however, any attempt to start the engine will trigger the alarm.
To Enter Transport Mode:
  1. Set the Engine Stop Switch to OFF.
  2. Turn the Ignition Switch to IGNITION.
  3. With an assigned fob within range, turn the Ignition Switch from IGNITION to ACCESS, or OFF to ACCESS, depending on switch sequence.
  4. Immediately press both the left and the right turn signal switches. This must be done within five seconds of turning the Ignition Switch to ACCESS.
  5. After the turn signals flash once, turn the Ignition Switch to OFF and the module is armed.
To Exit Transport Mode:
Return the system to normal operation:
  1. With the fob present, turn the Ignition Switch to IGNITION to disarm the HFSM. To cancel the transport mode, set the Engine Stop Switch to RUN.