| 1. | Check the transmission lubricant level with engine turned off and motorcycle resting on jiffy stand on level surface. | |
| 2. | See Maintenance and Lubrication → Changing Transmission Lubricant → Transmission Filler Plug. Unscrew and remove transmission lubricant filler plug with attached dipstick. Wipe dipstick clean. | |
| 3. | Reinsert dipstick into transmission fill hole. Bottom edge of threaded section of dipstick should rest on lip of fill hole. Do not screw filler plug in. | |
| 4. | See Maintenance and Lubrication → Changing Transmission Lubricant → Transmission Filler Plug. Remove filler plug and check lubricant level on dipstick. If necessary, add GENUINE Harley-Davidson FORMULA+ TRANSMISSION AND PRIMARY CHAINCASE LUBRICANT (Part No. 99851-05 quart) and recheck until level is between lower mark (1) and upper mark (2) on dipstick. NOTE Do not overfill or leakage may occur. The transmission capacity is approximately 0.95 L (32 fl oz). | |
| 5. | Inspect O-ring on drain plug for tears or damage. Replace as required. Wipe any foreign material from plug. | |
| 6. | Install filler plug/dipstick and tighten to 2.8–8.5 N·m (25–75 in-lbs). |